Items where Division is "Fundación Universitaria Internacional de Colombia > Research > Scientific Production" and Year is [pin missing: value2]
![]() | Up a level |
- FUNIBER (99)
- Fundación Universitaria Internacional de Colombia (45)
- Research (45)
- Scientific Production (29)
- Research (45)
- Fundación Universitaria Internacional de Colombia (45)
2023
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Chronic obstructive pulmonary disease (COPD) is a severe and chronic ailment that is currently ranked as the third most common cause of mortality across the globe. COPD patients often experience debilitating symptoms such as chronic coughing, shortness of breath, and fatigue. Sadly, the disease frequently goes undiagnosed until it is too late, leaving patients without the care they desperately need. So, COPD detection at an early stage is crucial to prevent further damage to the lungs and improve quality of life. Traditional COPD detection methods often rely on physical examinations and tests such as spirometry, chest radiography, blood gas tests, and genetic tests. However, these methods may not always be accurate or accessible. One of the key vital signs for detecting COPD is the patient’s respiration rate. However, it is crucial to consider a patient’s medical and demographic characteristics simultaneously for better detection results. To address this issue, this study aims to detect COPD patients using artificial intelligence techniques. To achieve this goal, a novel framework is proposed that utilizes ultra-wideband (UWB) radar-based temporal and spectral features to build machine learning and deep learning models. This new set of temporal and spectral features is extracted from respiration data collected non-invasively from 1.5 m distance using UWB radar. Different machine learning and deep learning models are trained and tested on the collected dataset. The findings are promising, with a high accuracy score of 100% for COPD detection. This means that the proposed framework could potentially save lives by identifying COPD patients at an early stage. The k-fold cross-validation technique and performance comparison with the state-of-the-art studies are applied to validate its performance, ensuring that the results are robust and reliable. The high accuracy score achieved in the study implies that the proposed framework has the potential for the efficient detection of COPD at an early stage.
metadata
Siddiqui, Hafeez-Ur-Rehman and Raza, Ali and Saleem, Adil Ali and Rustam, Furqan and Díez, Isabel de la Torre and Gavilanes Aray, Daniel and Lipari, Vivian and Ashraf, Imran and Dudley, Sandra
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, daniel.gavilanes@uneatlantico.es, vivian.lipari@uneatlantico.es, UNSPECIFIED, UNSPECIFIED
(2023)
An Approach to Detect Chronic Obstructive Pulmonary Disease Using UWB Radar-Based Temporal and Spectral Features.
Diagnostics, 13 (6).
p. 1096.
ISSN 2075-4418
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
The precise prediction of power estimates of wind–solar renewable energy sources becomes challenging due to their intermittent nature and difference in intensity between day and night. Machine-learning algorithms are non-linear mapping functions to approximate any given function from known input–output pairs and can be used for this purpose. This paper presents an artificial neural network (ANN)-based method to predict hybrid wind–solar resources and estimate power generation by correlating wind speed and solar radiation for real-time data. The proposed ANN allows optimization of the hybrid system’s operation by efficient wind and solar energy production estimation for a given set of weather conditions. The proposed model uses temperature, humidity, air pressure, solar radiation, optimum angle, and target values of known wind speeds, solar radiation, and optimum angle. A normalization function to narrow the error distribution and an iterative method with the Levenberg–Marquardt training function is used to reduce error. The experimental results show the effectiveness of the proposed approach against the existing wind, solar, or wind–solar estimation methods. It is envisaged that such an intelligent yet simplified method for predicting wind speed, solar radiation, and optimum angle, and designing wind–solar hybrid systems can improve the accuracy and efficiency of renewable energy generation.
metadata
Shafi, Imran and Khan, Harris and Farooq, Muhammad Siddique and Diez, Isabel de la Torre and Miró Vera, Yini Airet and Castanedo Galán, Juan and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, yini.miro@uneatlantico.es, juan.castanedo@uneatlantico.es, UNSPECIFIED
(2023)
An Artificial Neural Network-Based Approach for Real-Time Hybrid Wind–Solar Resource Assessment and Power Estimation.
Energies, 16 (10).
p. 4171.
ISSN 1996-1073
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Project-based organizations need to procure different commodities, and the failure/success of a project depends heavily on procurement management. Companies must refine and develop methods to simplify and optimize the procurement process in a highly competitive environment. This paper presents a methodology to help managers of project-based organizations analyze procurement processes to determine the optimal framework for simultaneously addressing multiple objectives. These goals include minimizing the time between the generation and required approval for a purchase, identifying unnamed activities, and allocating the budget efficiently. In this paper, we apply process mining algorithms to a dataset consisting of event logs on Oracle Financials-based enterprise resource planning (ERP) procurement processes in ERP systems and demonstrate interesting results leading to project procurement intelligence (PPI). The provided log data is the real-life data consisting of 180,462 events referring to seven activities within 43,101 cases. The logged procurement processes are filtered and analyzed using the open-source process mining frameworks PrOM and Disco. As a result of the process mining activities, a simulation of the discovered process model derived from the event log of the entire procurement process is presented, and the most frequent potential behaviors are identified. This analysis and extraction of frequent processes from corporate event logs help organizations understand, adapt, and redesign procurement operations and, most importantly, make them more efficient and of higher quality. This study shows that after the successful formulation of guiding principles, data refinement, and process structure optimization, the case study results are considered significant by the organization’s management.
metadata
Butt, Naveed Anwer and Mahmood, Zafar and Sana, Muhammad Usman and Díez, Isabel de la Torre and Castanedo Galán, Juan and Brie, Santiago and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, juan.castanedo@uneatlantico.es, santiago.brie@uneatlantico.es, UNSPECIFIED
(2023)
Behavioral and Performance Analysis of a Real-Time Case Study Event Log: A Process Mining Approach.
Applied Sciences, 13 (7).
p. 4145.
ISSN 2076-3417
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Breast cancer is prevalent in women and the second leading cause of death. Conventional breast cancer detection methods require several laboratory tests and medical experts. Automated breast cancer detection is thus very important for timely treatment. This study explores the influence of various feature selection technique to increase the performance of machine learning methods for breast cancer detection. Experimental results shows that use of appropriate features tend to show highly accurate prediction
metadata
Shafique, Rahman and Rustam, Furqan and Choi, Gyu Sang and Díez, Isabel de la Torre and Mahmood, Arif and Lipari, Vivian and Rodríguez Velasco, Carmen Lilí and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, vivian.lipari@uneatlantico.es, carmen.rodriguez@uneatlantico.es, UNSPECIFIED
(2023)
Breast Cancer Prediction Using Fine Needle Aspiration Features and Upsampling with Supervised Machine Learning.
Cancers, 15 (3).
p. 681.
ISSN 2072-6694
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
In the field of natural language processing, machine translation is a colossally developing research area that helps humans communicate more effectively by bridging the linguistic gap. In machine translation, normalization and morphological analyses are the first and perhaps the most important modules for information retrieval (IR). To build a morphological analyzer, or to complete the normalization process, it is important to extract the correct root out of different words. Stemming and lemmatization are techniques commonly used to find the correct root words in a language. However, a few studies on IR systems for the Urdu language have shown that lemmatization is more effective than stemming due to infixes found in Urdu words. This paper presents a lemmatization algorithm based on recurrent neural network models for the Urdu language. However, lemmatization techniques for resource-scarce languages such as Urdu are not very common. The proposed model is trained and tested on two datasets, namely, the Urdu Monolingual Corpus (UMC) and the Universal Dependencies Corpus of Urdu (UDU). The datasets are lemmatized with the help of recurrent neural network models. The Word2Vec model and edit trees are used to generate semantic and syntactic embedding. Bidirectional long short-term memory (BiLSTM), bidirectional gated recurrent unit (BiGRU), bidirectional gated recurrent neural network (BiGRNN), and attention-free encoder–decoder (AFED) models are trained under defined hyperparameters. Experimental results show that the attention-free encoder-decoder model achieves an accuracy, precision, recall, and F-score of 0.96, 0.95, 0.95, and 0.95, respectively, and outperforms existing models
metadata
Hafeez, Rabab and Anwar, Muhammad Waqas and Jamal, Muhammad Hasan and Fatima, Tayyaba and Martínez Espinosa, Julio César and Dzul López, Luis Alonso and Bautista Thompson, Ernesto and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, ulio.martinez@unini.edu.mx, luis.dzul@uneatlantico.es, ernesto.bautista@unini.edu.mx, UNSPECIFIED
(2023)
Contextual Urdu Lemmatization Using Recurrent Neural Network Models.
Mathematics, 11 (2).
p. 435.
ISSN 2227-7390
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Automated dental imaging interpretation is one of the most prolific areas of research using artificial intelligence. X-ray imaging systems have enabled dental clinicians to identify dental diseases. However, the manual process of dental disease assessment is tedious and error-prone when diagnosed by inexperienced dentists. Thus, researchers have employed different advanced computer vision techniques, as well as machine and deep learning models for dental disease diagnoses using X-ray imagery. In this regard, a lightweight Mask-RCNN model is proposed for periapical disease detection. The proposed model is constructed in two parts: a lightweight modified MobileNet-v2 backbone and region-based network (RPN) are proposed for periapical disease localization on a small dataset. To measure the effectiveness of the proposed model, the lightweight Mask-RCNN is evaluated on a custom annotated dataset comprising images of five different types of periapical lesions. The results reveal that the model can detect and localize periapical lesions with an overall accuracy of 94%, a mean average precision of 85%, and a mean insection over a union of 71.0%. The proposed model improves the detection, classification, and localization accuracy significantly using a smaller number of images compared to existing methods and outperforms state-of-the-art approaches
metadata
Fatima, Anum and Shafi, Imran and Afzal, Hammad and Mahmood, Khawar and Díez, Isabel de la Torre and Lipari, Vivian and Brito Ballester, Julién and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, vivian.lipari@uneatlantico.es, julien.brito@uneatlantico.es, UNSPECIFIED
(2023)
Deep Learning-Based Multiclass Instance Segmentation for Dental Lesion Detection.
Healthcare, 11 (3).
p. 347.
ISSN 2227-9032
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Monitoring tool conditions and sub-assemblies before final integration is essential to reducing processing failures and improving production quality for manufacturing setups. This research study proposes a real-time deep learning-based framework for identifying faulty components due to malfunctioning at different manufacturing stages in the aerospace industry. It uses a convolutional neural network (CNN) to recognize and classify intermediate abnormal states in a single manufacturing process. The manufacturing process for aircraft factory products comprises different phases; analyzing the components after the integration is labor-intensive and time-consuming, which often puts the company’s stake at high risk. To overcome these challenges, the proposed AI-based system can perform inspection and defect detection and alleviate the probability of components’ needing to be re-manufacturing after being assembled. In addition, it analyses the impact value, i.e., rework delays and costs, of manufacturing processes using a statistical process control tool on real-time data for various manufactured components. Defects are detected and classified using the CNN and teachable machine in the single manufacturing process during the initial stage prior to assembling the components. The results show the significance of the proposed approach in improving operational cost management and reducing rework-induced delays. Ground tests are conducted to calculate the impact value followed by the air tests of the final assembled aircraft. The statistical results indicate a 52.88% and 34.32% reduction in time delays and total cost, respectively.
metadata
Shafi, Imran and Mazhar, Muhammad Fawad and Fatima, Anum and Álvarez, Roberto Marcelo and Miró Vera, Yini Airet and Martínez Espinosa, Julio César and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, roberto.alvarez@uneatlantico.es, yini.miro@uneatlantico.es, ulio.martinez@unini.edu.mx, UNSPECIFIED
(2023)
Deep Learning-Based Real Time Defect Detection for Optimization of Aircraft Manufacturing and Control Performance.
Drones, 7 (1).
p. 31.
ISSN 2504-446X
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Classification is a commonly used technique in data mining and is applied in various fields such as sentiment analysis, fraud detection, and fault diagnosis. Multiclass classification, which involves more than two classes, is more complex than binary classification. There are mainly two ways to approach multiclass classification, one is to expand the binary classifier into a multiclass classifier through various strategies and the other is to divide the multiclass classification problem into multiple binary problems (binarization). Two popular approaches for binarization are One vs One (OvO) and One vs All (OvA). It is simpler to aggregate the outputs of all binary classifiers as the number of classifiers decreases. However, it causes an imbalance of positive and negative sample numbers, which affects the classification effect of each binary classifier. In this article, we contribute to the field of ensemble learning and multi-class classification by proposing a new method called Ensemble Partition Sampling (EPS). This article presents a new approach to multiclass classification using an "Ensemble Partition Sampling" method within the "one-vs-all" (OvA) framework. The primary goal of this method is to tackle the problem of data imbalance by incorporating ensemble learning and preprocessing techniques into each binary dataset. The study found that Ensemble Partition Sampling (EPS) is the most effective method for imbalanced and multiclass imbalanced classification, outperforming other methods including OvA, SMOTE, k-means-SMOTE, Bagging-RB, DES-MI, OvO-EASY, and OvO-SMB. The study used CART, Random Forest, and SVM as classifiers, and the results consistently showed that EPS outperformed all other algorithms. The findings suggest that EPS is a highly effective method for improving classification performance in imbalanced and multiclass imbalanced datasets.
metadata
Jabir, Brahim and Díez, Isabel De la Torre and Bautista Thompson, Ernesto and Ramírez-Vargas, Debora L. and Kuc Castilla, Ángel Gabriel
mail
UNSPECIFIED
(2023)
Ensemble Partition Sampling (EPS) for Improved Multi-Class Classification.
IEEE Access.
p. 1.
ISSN 2169-3536
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
With the advancement in information technology, digital data stealing and duplication have become easier. Over a trillion bytes of data are generated and shared on social media through the internet in a single day, and the authenticity of digital data is currently a major problem. Cryptography and image watermarking are domains that provide multiple security services, such as authenticity, integrity, and privacy. In this paper, a digital image watermarking technique is proposed that employs the least significant bit (LSB) and canny edge detection method. The proposed method provides better security services and it is computationally less expensive, which is the demand of today’s world. The major contribution of this method is to find suitable places for watermarking embedding and provides additional watermark security by scrambling the watermark image. A digital image is divided into non-overlapping blocks, and the gradient is calculated for each block. Then convolution masks are applied to find the gradient direction and magnitude, and non-maximum suppression is applied. Finally, LSB is used to embed the watermark in the hysteresis step. Furthermore, additional security is provided by scrambling the watermark signal using our chaotic substitution box. The proposed technique is more secure because of LSB’s high payload and watermark embedding feature after a canny edge detection filter. The canny edge gradient direction and magnitude find how many bits will be embedded. To test the performance of the proposed technique, several image processing, and geometrical attacks are performed. The proposed method shows high robustness to image processing and geometrical attacks
metadata
Faheem, Zaid Bin and Ishaq, Abid and Rustam, Furqan and de la Torre Díez, Isabel and Gavilanes, Daniel and Masías Vergara, Manuel and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, daniel.gavilanes@uneatlantico.es, manuel.masias@uneatlantico.es, UNSPECIFIED
(2023)
Image Watermarking Using Least Significant Bit and Canny Edge Detection.
Sensors, 23 (3).
p. 1210.
ISSN 1424-8220
Article
Subjects > Teaching
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Regulatory dispersion and a utilitarian use of sustainability deepen the gap within the teaching–learning process and limit the introduction of sustainable criteria in organizations through projects. The objective of this research consisted in developing a sustainable and holistic educational proposal for an online postgraduate program belonging to the Universidad Europea del Atlántico (UNEATLANTICO) within the field of projects. The proposal was based on the instrumentalization of a model comprised of national and international bibliographic references, resulting in a sustainability guide with significant improvements in relation to the reference standard par excellence: ISO 26000:2010. This guide formed the basis of a sustainability management plan, which was key in the project methodology and during the development of sustainable objectives and descriptors for each of the subjects. Lastly, the entities, attributes, and cardinal relationships were established for the development of a physical model used to facilitate the management of all this information within a SQL database. The rigor when determining the educational program, as well as the subsequent analysis of results as supported by the literature review, presupposes the application of this methodology toward other multidisciplinary programs contributing to the adoption of good sustainability practices within the educational field
metadata
Gracia Villar, Mónica and Álvarez, Roberto Marcelo and Brie, Santiago and Miró Vera, Yini Airet and García Villena, Eduardo
mail
monica.gracia@uneatlantico.es, roberto.alvarez@uneatlantico.es, santiago.brie@uneatlantico.es, yini.miro@uneatlantico.es, eduardo.garcia@uneatlantico.es
(2023)
Integration of Sustainable Criteria in the Development of a Proposal for an Online Postgraduate Program in the Projects Area.
Education Sciences, 13 (1).
p. 97.
ISSN 2227-7102
Article
Subjects > Biomedicine
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Background: Nowadays, there is no gold standard score for prehospital sepsis and sepsis-related mortality identification. The aim of the present study was to analyze the performance of qSOFA, NEWS2 and mSOFA as sepsis predictors in patients with infection-suspected in prehospital care. The second objective is to study the predictive ability of the aforementioned scores in septic-shock and in-hospital mortality.
Methods: Prospective, ambulance-based, and multicenter cohort study, developed by the emergency medical services, among patients (n = 535) with suspected infection transferred by ambulance with high-priority to the emergency department (ED). The study enrolled 40 ambulances and 4 ED in Spain between 1 January 2020, and 30 September 2021. All the variables used in the scores, in addition to socio-demographic data, standard vital signs, prehospital analytical parameters (glucose, lactate, and creatinine) were collected. For the evaluation of the scores, the discriminative power, calibration curve and decision curve analysis (DCA) were used.
Results: The mSOFA outperformed the other two scores for mortality, presenting the following AUCs: 0.877 (95%CI 0.841–0.913), 0.761 (95%CI 0.706–0.816), 0.731 (95%CI 0.674–0.788), for mSOFA, NEWS, and qSOFA, respectively. No differences were found for sepsis nor septic shock, but mSOFA’s AUCs was higher than the one of the other two scores. The calibration curve and DCA presented similar results.
Conclusion: The use of mSOFA could provide and extra insight regarding the short-term mortality and sepsis diagnostic, backing its recommendation in the prehospital scenario.
metadata
Melero-Guijarro, Laura and Sanz-García, Ancor and Martín-Rodríguez, Francisco and Lipari, Vivian and Mazas Pérez-Oleaga, Cristina and Carvajal-Altamiranda, Stefanía and Martínez López, Nohora Milena and Dominguez Azpíroz, Irma and Castro Villamor, Miguel A. and Sánchez Soberón, Irene and López-Izquierdo, Raúl
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, vivian.lipari@uneatlantico.es, cristina.mazas@uneatlantico.es, stefania.carvajal@uneatlantico.es, nohora.martinez@uneatlantico.es, irma.dominguez@unini.edu.mx, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED
(2023)
Prehospital qSOFA, mSOFA, and NEWS2 performance for sepsis prediction: A prospective, multi-center, cohort study.
Frontiers in Medicine, 10.
ISSN 2296-858X
Article
Subjects > Biomedicine
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Mutations allow viruses to continuously evolve by changing their genetic code to adapt to the hosts they infect. It is an adaptive and evolutionary mechanism that helps viruses acquire characteristics favoring their survival and propagation. The COVID-19 pandemic declared by the WHO in March 2020 is caused by the SARS-CoV-2 virus. The non-stop adaptive mutations of this virus and the emergence of several variants over time with characteristics favoring their spread constitute one of the biggest obstacles that researchers face in controlling this pandemic. Understanding the mutation mechanism allows for the adoption of anticipatory measures and the proposal of strategies to control its propagation. In this study, we focus on the mutations of this virus, and we propose the SARSMutOnto ontology to model SARS-CoV-2 mutations reported by Pango researchers. A detailed description is given for each mutation. The genes where the mutations occur and the genomic structure of this virus are also included. The sub-lineages and the recombinant sub-lineages resulting from these mutations are additionally represented while maintaining their hierarchy. We developed a Python-based tool to automatically generate this ontology from various published Pango source files. At the end of this paper, we provide some examples of SPARQL queries that can be used to exploit this ontology. SARSMutOnto might become a ‘wet bench’ machine learning tool for predicting likely future mutations based on previous mutations.
metadata
Bakkas, Jamal and Hanine, Mohamed and Chekry, Abderrahman and Gounane, Said and de la Torre Díez, Isabel and Lipari, Vivian and Martínez López, Nohora Milena and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, vivian.lipari@uneatlantico.es, nohora.martinez@uneatlantico.es, UNSPECIFIED
(2023)
SARSMutOnto: An Ontology for SARS-CoV-2 Lineages and Mutations.
Viruses, 15 (2).
p. 505.
ISSN 1999-4915
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Safety critical spare parts hold special importance for aviation organizations. However, accurate forecasting of such parts becomes challenging when the data are lumpy or intermittent. This research paper proposes an artificial neural network (ANN) model that is able to observe the recent trends of error surface and responds efficiently to the local gradient for precise spare prediction results marked by lumpiness. Introduction of the momentum term allows the proposed ANN model to ignore small variations in the error surface and to behave like a low-pass filter and thus to avoid local minima. Using the whole collection of aviation spare parts having the highest demand activity, an ANN model is built to predict the failure of aircraft installed parts. The proposed model is first optimized for its topology and is later trained and validated with known historical demand datasets. The testing phase includes introducing input vector comprising influential factors that dictate sporadic demand. The proposed approach is found to provide superior results due to its simple architecture and fast converging training algorithm once evaluated against some other state-of-the-art models from the literature using related benchmark performance criteria. The experimental results demonstrate the effectiveness of the proposed approach. The accurate prediction of the cost-heavy and critical spare parts is expected to result in huge cost savings, reduce downtime, and improve the operational readiness of drones, fixed wing aircraft and helicopters. This also resolves the dead inventory issue as a result of wrong demands of fast moving spares due to human error.
metadata
Shafi, Imran and Sohail, Amir and Ahmad, Jamil and Martínez Espinosa, Julio César and Dzul Lopez, Luis Alonso and Bautista Thompson, Ernesto and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, luis.dzul@unini.edu.mx, ernesto.bautista@unini.edu.mx, UNSPECIFIED
(2023)
Spare Parts Forecasting and Lumpiness Classification Using Neural Network Model and Its Impact on Aviation Safety.
Applied Sciences, 13 (9).
p. 5475.
ISSN 2076-3417
2022
Article
Subjects > Biomedicine
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Artificial intelligence has been widely used in the field of dentistry in recent years. The present study highlights current advances and limitations in integrating artificial intelligence, machine learning, and deep learning in subfields of dentistry including periodontology, endodontics, orthodontics, restorative dentistry, and oral pathology. This article aims to provide a systematic review of current clinical applications of artificial intelligence within different fields of dentistry. The preferred reporting items for systematic reviews (PRISMA) statement was used as a formal guideline for data collection. Data was obtained from research studies for 2009–2022. The analysis included a total of 55 papers from Google Scholar, IEEE, PubMed, and Scopus databases. Results show that artificial intelligence has the potential to improve dental care, disease diagnosis and prognosis, treatment planning, and risk assessment. Finally, this study highlights the limitations of the analyzed studies and provides future directions to improve dental care
metadata
Fatima, Anum and Shafi, Imran and Afzal, Hammad and Díez, Isabel De La Torre and Lourdes, Del Rio-Solá M. and Breñosa, Jose and Martínez Espinosa, Julio César and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, UNSPECIFIED
(2022)
Advancements in Dentistry with Artificial Intelligence: Current Clinical Applications and Future Perspectives.
Healthcare, 10 (11).
p. 2188.
ISSN 2227-9032
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
The fast expansion of ICT (information and communications technology) has provided rich sources of data for the analysis, modeling, and interpretation of human mobility patterns. Many researchers have already introduced behavior-aware protocols for a better understanding of architecture and realistic modeling of behavioral characteristics, similarities, and aggregation of mobile users. We are introducing the similarity analytical framework for the mobile encountering analysis to allow for more direct integration between the physical world and cyber-based systems. In this research, we propose a method for finding the similarity behavior of users’ mobility patterns based on location and time. This research was conducted to develop a technique for producing co-occurrence matrices of users based on their similar behaviors to determine their encounters. Our approach, named SAA (similarity analysis approach), makes use of the device info i.e., IP (internet protocol) and MAC (media access control) address, providing an in-depth analysis of similarity behaviors on a daily basis. We analyzed the similarity distributions of users on different days of the week for different locations based on their real movements. The results show similar characteristics of users with common mobility behaviors based on location and time to showcase the efficacy. The results show that the proposed SAA approach is 33% more accurate in terms of recognizing the user’s similarity as compared to the existing similarity approach.
metadata
Memon, Ambreen and Kilby, Jeff and Breñosa, Jose and Martínez Espinosa, Julio César and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, UNSPECIFIED
(2022)
Analysis and Implementation of Human Mobility Behavior Using Similarity Analysis Based on Co-Occurrence Matrix.
Sensors, 22 (24).
p. 9898.
ISSN 1424-8220
Article
Subjects > Social Sciences
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Innovation plays a pivotal role in the progress and goodwill of an organization, and its ability to thrive. Consequently, the impact analysis of innovation on the performance of an organization holds great importance. This paper presents a two-stage analytical framework to examine the impact of business innovation on a firm’s performance, especially firms from the manufacturing sector. The prime objective is to identify the factors that have an impact on firm-level innovation, and to examine the impact of firm-level innovation on business performance. The framework and its analysis are based on the latest World Bank enterprise survey, with a sample size of 696 manufacturing firms. The first stage of the proposed framework establishes the analytical results through Bivariate Probit, which indicates that research and development (R&D) has a significantly positive impact on the product, process, marketing, and organizational innovations. It thus highlights the important role of the allocation of lump-sum amounts for R&D activities. The statistical analysis shows that innovation does not depend on the size of the firms. Moreover, the older firms are found to be wiser at conducting R&D than newer firms that are reluctant to take risks. The second stage of the proposed framework separately analyzes the impacts of the product and organizational innovation, and the process and marketing innovation on the firm performance, and finds them to be statistically significant and insignificant, respectively.
metadata
Aslam, Mahrukh and Shafi, Imran and Ahmad, Jamil and Álvarez, Roberto Marcelo and Miró Vera, Yini Airet and Soriano Flores, Emmanuel and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, roberto.alvarez@uneatlantico.es, yini.miro@uneatlantico.es, emmanuel.soriano@uneatlantico.es, UNSPECIFIED
(2022)
An Analytical Framework for Innovation Determinants and Their Impact on Business Performance.
Sustainability, 15 (1).
p. 458.
ISSN 2071-1050
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
The demand for cloud computing has drastically increased recently, but this paradigm has several issues due to its inherent complications, such as non-reliability, latency, lesser mobility support, and location-aware services. Fog computing can resolve these issues to some extent, yet it is still in its infancy. Despite several existing works, these works lack fault-tolerant fog computing, which necessitates further research. Fault tolerance enables the performing and provisioning of services despite failures and maintains anti-fragility and resiliency. Fog computing is highly diverse in terms of failures as compared to cloud computing and requires wide research and investigation. From this perspective, this study primarily focuses on the provision of uninterrupted services through fog computing. A framework has been designed to provide uninterrupted services while maintaining resiliency. The geographical information system (GIS) services have been deployed as a test bed which requires high computation, requires intensive resources in terms of CPU and memory, and requires low latency. Keeping different types of failures at different levels and their impacts on service failure and greater response time in mind, the framework was made anti-fragile and resilient at different levels. Experimental results indicate that during service interruption, the user state remains unaffected.
metadata
Mir, Tahira Sarwar and Liaqat, Hannan Bin and Kiren, Tayybah and Sana, Muhammad Usman and Álvarez, Roberto Marcelo and Miró Vera, Yini Airet and Pascual Barrera, Alina Eugenia and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, roberto.alvarez@uneatlantico.es, yini.miro@uneatlantico.es, alina.pascual@unini.edu.mx, UNSPECIFIED
(2022)
Antifragile and Resilient Geographical Information System Service Delivery in Fog Computing.
Sensors, 22 (22).
p. 8778.
ISSN 1424-8220
Article
Subjects > Biomedicine
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Español
Patient care and convenience remain the concern of medical professionals and caregivers alike. An unconscious patient confined to a bed may develop fluid accumulation and pressure sores due to inactivity and deficiency of oxygen flow. Moreover, weight monitoring is crucial for an effective treatment plan, which is difficult to measure for bedridden patients. This paper presents the design and development of a smart and cost-effective independent system for lateral rotation, movement, weight measurement, and transporting immobile patients. Optimal dimensions and practical design specifications are determined by a survey across various hospitals. Subsequently, the proposed hoist-based weighing and turning mechanism is CAD-modeled and simulated. Later, the structural analysis is carried out to select suitable metallurgy for various sub-assemblies to ensure design reliability. After fabrication, optimization, integration, and testing procedures, the base frame is designed to mount a hydraulic motor for the actuator, a DC power source for self-sustenance, and lockable wheels for portability. The installation of a weighing scale and a hydraulic actuator is ensured to lift the patient for weight measuring up to 600 pounds or lateral turning of 80 degrees both ways. The developed system offers simple operating characteristics, allows for keeping patient weight records, and assists nurses in changing patients’ lateral positions both ways, comfortably massage patients’ backs, and transport them from one bed to another. Additionally, being lightweight offers reduced contact with the patient to increase the healthcare staff’s safety in pandemics; it is also height adjustable and portable, allowing for use with multiple-sized beds and easy transportation across the medical facility. The feedback from paramedics is encouraging regarding reducing labor-intensive nursing tasks, alleviating the discomfort of long-term bed-ridden patients, and allowing medical practitioners to suggest better treatment plans
metadata
Shafi, Imran and Farooq, Muhammad Siddique and De La Torre Díez, Isabel and Breñosa, Jose and Martínez Espinosa, Julio César and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, UNSPECIFIED
(2022)
Design and Development of Smart Weight Measurement, Lateral Turning and Transfer Bedding for Unconscious Patients in Pandemics.
Healthcare, 10 (11).
p. 2174.
ISSN 2227-9032
Article
Subjects > Social Sciences
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
This article proposes a discussion on the form of coexistence of local Development Agencies in Uruguay, with local governments in the face of the new scenarios marked by the decentralization process, initiated in the country with the Constitutional Reform of 1996 and culminating in February 2009, with the Law of Political Decentralization and Citizen Participation. The discussion applies in particular to the local development agency of the city of Rivera (ADR), located in the northeast of the country. A descriptive, mixed, bibliographic, documentary investigation was carried out with primary data collection to internal and external references to ADR. The results show that the coexistence of both institutions has been difficult, without defining clear roles. Promoting dialogue to define the role of each seems to be the great challenge facing the sustainability of the agency
metadata
Garat de Marin, Mirtha Silvana and Soriano Flores, Emmanuel and Rodríguez Velasco, Carmen Lilí and Silva Alvarado, Eduardo and Calderón Iglesias, Rubén and Álvarez, Roberto Marcelo and Gracia Villar, Santos
mail
silvana.marin@uneatlantico.es, emmanuel.soriano@uneatlantico.es, carmen.rodriguez@uneatlantico.es, UNSPECIFIED, ruben.calderon@uneatlantico.es, roberto.alvarez@uneatlantico.es, santos.gracia@uneatlantico.es
(2022)
Development Agencies and Local Governments—Coexistence within the Same Territory.
Social Sciences, 11 (9).
p. 398.
ISSN 2076-0760
Article
Subjects > Biomedicine
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
The diagnosis of early-stage lung cancer is challenging due to its asymptomatic nature, especially given the repeated radiation exposure and high cost of computed tomography(CT). Examining the lung CT images to detect pulmonary nodules, especially the cell lung cancer lesions, is also tedious and prone to errors even by a specialist. This study proposes a cancer diagnostic model based on a deep learning-enabled support vector machine (SVM). The proposed computer-aided design (CAD) model identifies the physiological and pathological changes in the soft tissues of the cross-section in lung cancer lesions. The model is first trained to recognize lung cancer by measuring and comparing the selected profile values in CT images obtained from patients and control patients at their diagnosis. Then, the model is tested and validated using the CT scans of both patients and control patients that are not shown in the training phase. The study investigates 888 annotated CT scans from the publicly available LIDC/IDRI database. The proposed deep learning-assisted SVM-based model yields 94% accuracy for pulmonary nodule detection representing early-stage lung cancer. It is found superior to other existing methods including complex deep learning, simple machine learning, and the hybrid techniques used on lung CT images for nodule detection. Experimental results demonstrate that the proposed approach can greatly assist radiologists in detecting early lung cancer and facilitating the timely management of patients.
metadata
Shafi, Imran and Din, Sadia and Khan, Asim and Díez, Isabel De La Torre and Pali-Casanova, Ramón and Tutusaus, Kilian and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, ramon.pali@unini.edu.mx, kilian.tutusaus@uneatlantico.es, UNSPECIFIED
(2022)
An Effective Method for Lung Cancer Diagnosis from CT Scan Using Deep Learning-Based Support Vector Network.
Cancers, 14 (21).
p. 5457.
ISSN 2072-6694
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Facial emotion recognition (FER) is an important and developing topic of research in the field of pattern recognition. The effective application of facial emotion analysis is gaining popularity in surveillance footage, expression analysis, activity recognition, home automation, computer games, stress treatment, patient observation, depression, psychoanalysis, and robotics. Robot interfaces, emotion-aware smart agent systems, and efficient human–computer interaction all benefit greatly from facial expression recognition. This has garnered attention as a key prospect in recent years. However, due to shortcomings in the presence of occlusions, fluctuations in lighting, and changes in physical appearance, research on emotion recognition has to be improved. This paper proposes a new architecture design of a convolutional neural network (CNN) for the FER system and contains five convolution layers, one fully connected layer with rectified linear unit activation function, and a SoftMax layer. Additionally, the feature map enhancement is applied to accomplish a higher detection rate and higher precision. Lastly, an application is developed that mitigates the effects of the aforementioned problems and can identify the basic expressions of human emotions, such as joy, grief, surprise, fear, contempt, anger, etc. Results indicate that the proposed CNN achieves 92.66% accuracy with mixed datasets, while the accuracy for the cross dataset is 94.94%.
metadata
Qazi, Awais Salman and Farooq, Muhammad Shoaib and Rustam, Furqan and Gracia Villar, Mónica and Rodríguez Velasco, Carmen Lilí and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, monica.gracia@uneatlantico.es, carmen.rodriguez@uneatlantico.es, UNSPECIFIED
(2022)
Emotion Detection Using Facial Expression Involving Occlusions and Tilt.
Applied Sciences, 12 (22).
p. 11797.
ISSN 2076-3417
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
The purpose of this article is to help to bridge the gap between sustainability and its application to project management by developing a methodology based on artificial intelligence to diagnose, classify, and forecast the level of sustainability of a sample of 186 projects aimed at local communities in Latin American and Caribbean countries. First, the compliance evaluation with the Sustainable Development Goals (SDGs) within the framework of the 2030 Agenda served to diagnose and determine, through fuzzy sets, a global sustainability index for the sample, resulting in a value of 0.638, in accordance with the overall average for the region. Probabilistic predictions were then made on the sustainability of the projects using a series of supervised learning classifiers (SVM, Random Forest, AdaBoost, KNN, etc.), with the SMOTE resampling technique, which provided a significant improvement toward the results of the different metrics of the base models. In this context, the Support Vector Machine (SVM) + SMOTE was the best classification algorithm, with accuracy of 0.92. Lastly, the extrapolation of this methodology is to be expected toward other realities and local circumstances, contributing to the fulfillment of the SDGs and the development of individual and collective capacities through the management and direction of projects.
metadata
García Villena, Eduardo and Pascual Barrera, Alina Eugenia and Álvarez, Roberto Marcelo and Dzul López, Luis Alonso and Tutusaus, Kilian and Vidal Mazón, Juan Luis and Miró Vera, Yini Airet and Brie, Santiago and López Flores, Miguel A.
mail
eduardo.garcia@uneatlantico.es, alina.pascual@unini.edu.mx, roberto.alvarez@uneatlantico.es, luis.dzul@uneatlantico.es, kilian.tutusaus@uneatlantico.es, juanluis.vidal@uneatlantico.es, yini.miro@uneatlantico.es, santiago.brie@uneatlantico.es, miguelangel.lopez@uneatlantico.es
(2022)
Evaluation of the Sustainable Development Goals in the Diagnosis and Prediction of the Sustainability of Projects Aimed at Local Communities in Latin America and the Caribbean.
Applied Sciences, 12 (21).
p. 11188.
ISSN 2076-3417
Article
Subjects > Social Sciences
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Angola, as with many countries on the African continent, has great inequalities or asymmetries between its provinces. At the economic, financial, and technological level, there is a great disparity between them, where it is observed that the province of Luanda is the largest financial business center to the detriment of others, such as Moxico, Zaire, and Cabinda. In the latter, despite the advantages of high oil production, from a regional point of view, they remain almost stagnant in time, in a social dysfunction where the population lives on extractivism and artisanal fishing. This article analyzes the most important events in contemporary regional history, the Portuguese occupation that was the Portuguese colonial rule over Angola (1890–1930) and the civil war that was a struggle between Angolans for control of the country (1975–2002), in the consolidation of the asymmetries between provinces. For this work, a theoretical-reflective study was conducted based on the reading of books, articles, and previous investigations on the phenomenon studied. Considering the interpretation and analysis of the theoretical content obtained through the bibliographic research conducted, this theoretical construction approaches the qualitative approach. We conclude that the deep inequalities between regions and within them, between the provinces studied, originated historically in the form of exploitation of the regions and from the consequences of the war. The asymmetries, observed through the variables studied show that the provinces historically explored and considered object regions present a lower growth compared to those that were considered subject regions in which the applied geopolitical strategy, as they are centers of primary production flows, was different. We also observe that, due to the conflicts of the civil war in the less developed regions, the inequalities have deepened, contributing seriously to a higher level of poverty and a lower development of the provinces where these conflicts took place.
metadata
Catoto Capitango, João Adolfo and Garat de Marin, Mirtha Silvana and Soriano Flores, Emmanuel and Rojo Gutiérrez, Marco Antonio and Gracia Villar, Mónica and Durántez Prados, Frigdiano Álvaro
mail
UNSPECIFIED, silvana.marin@uneatlantico.es, emmanuel.soriano@uneatlantico.es, marco.rojo@unini.edu.mx, monica.gracia@uneatlantico.es, durantez@uneatlantico.es
(2022)
Inequalities and Asymmetries in the Development of Angola’s Provinces: The Impact of Colonialism and Civil War.
Social Sciences, 11 (8).
p. 334.
ISSN 2076-0760
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Abierto
Inglés
This paper presents the design, development, and testing of an IoT-enabled smart stick for visually impaired people to navigate the outside environment with the ability to detect and warn about obstacles. The proposed design employs ultrasonic sensors for obstacle detection, a water sensor for sensing the puddles and wet surfaces in the user’s path, and a high-definition video camera integrated with object recognition. Furthermore, the user is signaled about various hindrances and objects using voice feedback through earphones after accurately detecting and identifying objects. The proposed smart stick has two modes; one uses ultrasonic sensors for detection and feedback through vibration motors to inform about the direction of the obstacle, and the second mode is the detection and recognition of obstacles and providing voice feedback. The proposed system allows for switching between the two modes depending on the environment and personal preference. Moreover, the latitude/longitude values of the user are captured and uploaded to the IoT platform for effective tracking via global positioning system (GPS)/global system for mobile communication (GSM) modules, which enable the live location of the user/stick to be monitored on the IoT dashboard. A panic button is also provided for emergency assistance by generating a request signal in the form of an SMS containing a Google maps link generated with latitude and longitude coordinates and sent through an IoT-enabled environment. The smart stick has been designed to be lightweight, waterproof, size adjustable, and has long battery life. The overall design ensures energy efficiency, portability, stability, ease of access, and robust features.
metadata
Farooq, Muhammad Siddique and Shafi, Imran and Khan, Harris and Díez, Isabel De La Torre and Breñosa, Jose and Martínez Espinosa, Julio César and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, UNSPECIFIED
(2022)
IoT Enabled Intelligent Stick for Visually Impaired People for Obstacle Recognition.
Sensors, 22 (22).
p. 8914.
ISSN 1424-8220
Article
Subjects > Biomedicine
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Mobility and low energy consumption are considered the main requirements for wireless body area sensor networks (WBASN) used in healthcare monitoring systems (HMS). In HMS, battery-powered sensor nodes with limited energy are used to obtain vital statistics about the body. Hence, energy-efficient schemes are desired to maintain long-term and steady connectivity of the sensor nodes. A sheer amount of energy is consumed in activities such as idle listening, excessive transmission and reception of control messages, packet collisions and retransmission of packets, and poor path selection, that may lead to more energy consumption. A combination of adaptive scheduling with an energy-efficient protocol can help select an appropriate path at a suitable time to minimize the control overhead, energy consumption, packet collision, and excessive idle listening. This paper proposes a region-based energy-efficient multipath routing (REMR) approach that divides the entire sensor network into clusters with preferably multiple candidates to represent each cluster. The cluster representatives (CRs) route packets through various clusters. For routing, the energy requirement of each route is considered, and the path with minimum energy requirements is selected. Similarly, end-to-end delay, higher throughput, and packet-delivery ratio are considered for packet routing.
metadata
Akbar, Shuja and Mehdi, Muhammad Mohsin and Jamal, M. Hasan and Raza, Imran and Hussain, Syed Asad and Breñosa, Jose and Martínez Espinosa, Julio César and Pascual Barrera, Alina Eugenia and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, josemanuel.brenosa@uneatlantico.es, ulio.martinez@unini.edu.mx, alina.pascual@unini.edu.mx, UNSPECIFIED
(2022)
Multipath Routing in Wireless Body Area Sensor Network for Healthcare Monitoring.
Healthcare, 10 (11).
p. 2297.
ISSN 2227-9032
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
β-Thalassemia is one of the dangerous causes of the high mortality rate in the Mediterranean countries. Substantial resources are required to save a β-Thalassemia carriers’ life and early detection of thalassemia patients can help appropriate treatment to increase the carrier’s life expectancy. Being a genetic disease, it can not be prevented however the analysis of several indicators in parents’ blood can be used to detect disorders causing Thalassemia. Laboratory tests for Thalassemia are time-consuming and expensive like high-performance liquid chromatography, Complete Blood Count (CBC) with peripheral smear, genetic test, etc. Red blood indices from CBC can be used with machine learning models for the same task. Despite the available approaches for Thalassemia carriers from CBC data, gaps exist between the desired and achieved accuracy. Moreover, the data imbalance problem is studied well which makes the models less generalizable. This study proposes a highly accurate approach for β-Thalassemia detection using red blood indices from CBC augmented by supervised machine learning. In view of the fact that all the features do not carry predictive information regarding the target variable, this study employs a unified framework of two features selection techniques including Principal Component Analysis (PCA) and Singular Vector Decomposition (SVD). The data imbalance between β-Thalassemia carrier and non-carriers is handled by Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic (ADASYN). Extensive experiments are performed using many state-of-the-art machine learning models and deep learning models. Experimental results indicate the superiority of the proposed approach over existing approaches with an accuracy score of 0.96.
metadata
Rustam, Furqan and Ashraf, Imran and Jabbar, Shehbaz and Tutusaus, Kilian and Mazas Pérez-Oleaga, Cristina and Pascual Barrera, Alina Eugenia and de la Torre Diez, Isabel
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, kilian.tutusaus@uneatlantico.es, cristina.mazas@uneatlantico.es, alina.pascual@unini.edu.mx, UNSPECIFIED
(2022)
Prediction β-Thalassemia carriers using complete blood count features.
Scientific Reports, 12 (1).
ISSN 2045-2322
Article
Subjects > Biomedicine
Subjects > Nutrition
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Cerrado
Inglés
Cactus has been used in traditional folk medicine because of its role in treating a number of diseases and conditions. Prickly pear fruit is an excellent source of secondary metabolites (i.e., betalains, flavonoids, and ascorbic acid) with health-promoting properties against many common human diseases, including diabetes, hypertension, hypercholesterolemia, rheumatic pain, gastric mucosa diseases and asthma. In addition, prickly pears are potential candidates for the development of low-cost functional foods because they grow with low water requirements in arid regions of the world. This review describes the main bioactive compounds found in this fruit and shows the in vitro and some clinical studies about the fruit of most important cactus (Opuntia ficus-indica) and its relationship with some chronic diseases. Even though a lot of effort have been done to study the relationship between this fruit and the human health, more studies on Opuntia ficus-indica could help better understand its pharmacological mechanism of action to provide clear scientific evidence to explain its traditional uses, and to identify its therapeutic potential in other diseases.
metadata
Armas Diaz, Yasmany and Machì, Michele and Salinari, Alessia and Mazas Pérez-Oleaga, Cristina and Martínez López, Nohora Milena and Briones Urbano, Mercedes and Cianciosi, Danila
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, cristina.mazas@uneatlantico.es, nohora.martinez@uneatlantico.es, mercedes.briones@uneatlantico.es, UNSPECIFIED
(2022)
Prickly pear fruits from "Opuntia ficus-indica" varieties as a source of potential bioactive compounds in the Mediterranean diet.
Mediterranean Journal of Nutrition and Metabolism, 15 (4).
pp. 581-592.
ISSN 1973798X
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Conventional outage management practices in distribution systems are tedious and complex due to the long time taken to locate the fault. Emerging smart technologies and various cloud services offered could be utilized and integrated into the power industry to enhance the overall process, especially in the fault monitoring and normalizing fields in distribution systems. This paper introduces smart fault monitoring and normalizing technologies in distribution systems by using one of the most popular cloud service platforms, the Microsoft Azure Internet of Things (IoT) Hub, together with some of the related services. A hardware prototype was constructed based on part of a real underground distribution system network, and the fault monitoring and normalizing techniques were integrated to form a system. Such a system with IoT integration effectively reduces the power outage experienced by customers in the healthy section of the faulted feeder from approximately 1 h to less than 5 min and is able to improve the System Average Interruption Duration Index (SAIDI) and System Average Interruption Frequency Index (SAIFI) in electric utility companies significantly
metadata
Peter, Geno and Stonier, Albert Alexander and Gupta, Punit and Gavilanes, Daniel and Masías Vergara, Manuel and Lung sin, Jong
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, daniel.gavilanes@uneatlantico.es, manuel.masias@uneatlantico.es, UNSPECIFIED
(2022)
Smart Fault Monitoring and Normalizing of a Power Distribution System Using IoT.
Energies, 15 (21).
p. 8206.
ISSN 1996-1073
Article
Subjects > Engineering
Europe University of Atlantic > Research > Scientific Production
Fundación Universitaria Internacional de Colombia > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Ibero-american International University > Research > Scientific Production
Universidad Internacional do Cuanza > Research > Scientific Production
Abierto
Inglés
Technology’s expansion has contributed to the rise in popularity of social media platforms. Twitter is one of the leading social media platforms that people use to share their opinions. Such opinions, sometimes, may contain threatening text, deliberately or non-deliberately, which can be disturbing for other users. Consequently, the detection of threatening content on social media is an important task. Contrary to high-resource languages like English, Dutch, and others that have several such approaches, the low-resource Urdu language does not have such a luxury. Therefore, this study presents an intelligent threatening language detection for the Urdu language. A stacking model is proposed that uses an extra tree (ET) classifier and Bayes theorem-based Bernoulli Naive Bayes (BNB) as the based learners while logistic regression (LR) is employed as the meta learner. A performance analysis is carried out by deploying a support vector classifier, ET, LR, BNB, fully connected network, convolutional neural network, long short-term memory, and gated recurrent unit. Experimental results indicate that the stacked model performs better than both machine learning and deep learning models. With 74.01% accuracy, 70.84% precision, 75.65% recall, and 73.99% F1 score, the model outperforms the existing benchmark study.
metadata
Mehmood, Aneela and Farooq, Muhammad Shoaib and Naseem, Ansar and Rustam, Furqan and Gracia Villar, Mónica and Rodríguez Velasco, Carmen Lilí and Ashraf, Imran
mail
UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED, monica.gracia@uneatlantico.es, carmen.rodriguez@uneatlantico.es, UNSPECIFIED
(2022)
Threatening URDU Language Detection from Tweets Using Machine Learning.
Applied Sciences, 12 (20).
p. 10342.
ISSN 2076-3417
<a href="/5397/1/drones-07-00031-v4.pdf" class="ep_document_link"><img class="ep_doc_icon" alt="[img]" src="/style/images/fileicons/text.png" border="0"/></a>
en
open
Monitoring tool conditions and sub-assemblies before final integration is essential to reducing processing failures and improving production quality for manufacturing setups. This research study proposes a real-time deep learning-based framework for identifying faulty components due to malfunctioning at different manufacturing stages in the aerospace industry. It uses a convolutional neural network (CNN) to recognize and classify intermediate abnormal states in a single manufacturing process. The manufacturing process for aircraft factory products comprises different phases; analyzing the components after the integration is labor-intensive and time-consuming, which often puts the company’s stake at high risk. To overcome these challenges, the proposed AI-based system can perform inspection and defect detection and alleviate the probability of components’ needing to be re-manufacturing after being assembled. In addition, it analyses the impact value, i.e., rework delays and costs, of manufacturing processes using a statistical process control tool on real-time data for various manufactured components. Defects are detected and classified using the CNN and teachable machine in the single manufacturing process during the initial stage prior to assembling the components. The results show the significance of the proposed approach in improving operational cost management and reducing rework-induced delays. Ground tests are conducted to calculate the impact value followed by the air tests of the final assembled aircraft. The statistical results indicate a 52.88% and 34.32% reduction in time delays and total cost, respectively.
Imran Shafi mail , Muhammad Fawad Mazhar mail , Anum Fatima mail , Roberto Marcelo Álvarez mail roberto.alvarez@uneatlantico.es, Yini Airet Miró Vera mail yini.miro@uneatlantico.es, Julio César Martínez Espinosa mail ulio.martinez@unini.edu.mx, Imran Ashraf mail ,
Shafi
en
close
Systematic Review of Machine Learning applied to the Prediction of Obesity and Overweight
Obesity and overweight has increased in the last year and has become a pandemic disease, the result of sedentary lifestyles and unhealthy diets rich in sugars, refined starches, fats and calories. Machine learning (ML) has proven to be very useful in the scientific community, especially in the health sector. With the aim of providing useful tools to help nutritionists and dieticians, research focused on the development of ML and Deep Learning (DL) algorithms and models is searched in the literature. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol has been used, a very common technique applied to carry out revisions. In our proposal, 17 articles have been filtered in which ML and DL are applied in the prediction of diseases, in the delineation of treatment strategies, in the improvement of personalized nutrition and more. Despite expecting better results with the use of DL, according to the selected investigations, the traditional methods are still the most used and the yields in both cases fluctuate around positive values, conditioned by the databases (transformed in each case) to a greater extent than by the artificial intelligence paradigm used. Conclusions: An important compilation is provided for the literature in this area. ML models are time-consuming to clean data, but (like DL) they allow automatic modeling of large volumes of data which makes them superior to traditional statistics.
Antonio Ferreras mail , Sandra Sumalla Cano mail sandra.sumalla@uneatlantico.es, Rosmeri Martínez-Licort mail , Iñaki Elío Pascual mail inaki.elio@uneatlantico.es, Kilian Tutusaus mail kilian.tutusaus@uneatlantico.es, Thomas Prola mail thomas.prola@uneatlantico.es, Juan Luis Vidal Mazón mail juanluis.vidal@uneatlantico.es, Benjamín Sahelices mail , Isabel de la Torre Díez mail ,
Ferreras
<a href="/5470/1/education-13-00097.pdf" class="ep_document_link"><img class="ep_doc_icon" alt="[img]" src="/style/images/fileicons/text.png" border="0"/></a>
en
open
Regulatory dispersion and a utilitarian use of sustainability deepen the gap within the teaching–learning process and limit the introduction of sustainable criteria in organizations through projects. The objective of this research consisted in developing a sustainable and holistic educational proposal for an online postgraduate program belonging to the Universidad Europea del Atlántico (UNEATLANTICO) within the field of projects. The proposal was based on the instrumentalization of a model comprised of national and international bibliographic references, resulting in a sustainability guide with significant improvements in relation to the reference standard par excellence: ISO 26000:2010. This guide formed the basis of a sustainability management plan, which was key in the project methodology and during the development of sustainable objectives and descriptors for each of the subjects. Lastly, the entities, attributes, and cardinal relationships were established for the development of a physical model used to facilitate the management of all this information within a SQL database. The rigor when determining the educational program, as well as the subsequent analysis of results as supported by the literature review, presupposes the application of this methodology toward other multidisciplinary programs contributing to the adoption of good sustainability practices within the educational field
Mónica Gracia Villar mail monica.gracia@uneatlantico.es, Roberto Marcelo Álvarez mail roberto.alvarez@uneatlantico.es, Santiago Brie mail santiago.brie@uneatlantico.es, Yini Airet Miró Vera mail yini.miro@uneatlantico.es, Eduardo García Villena mail eduardo.garcia@uneatlantico.es,
Gracia Villar
<a class="ep_document_link" href="/5595/1/339-790-1-PB.pdf"><img class="ep_doc_icon" alt="[img]" src="/style/images/fileicons/text.png" border="0"/></a>
pt
open
O quadro legal angolano para o subsistema de ensino superior cresceu significativamente desde 2009, um crescimento que tem estado a visar o aumento da transparência e da qualidade dos processos educacionais nas instituições de ensino superior (IES) angolanas. Entretanto, a qualidade do ensino superior em Angola não sofreu melhorias significativas por não se estar a cumprir escrupulosamente com o quadro legal de forma sistemática, o que tem resultado em encerramentos de cursos e instituições do ensino superior. Este artigo tem como objetivo principal desenvolver um instrumento de auto- monitorização da conformidade legal que pode ajudar as IES angolanas a tirarem mais proveito do quadro legal do ensino superior. Por intermédio de um levantamento bibliográfico das leis relevantes ao ensino superior em Angola, a identificação de obrigações legais nestas e o desenvolvimento de uma série de tabelas de verificação de conformidade, este estudo apresenta uma checklist de auto verificação da conformidade entre o funcionamento das instituições do ensino superior e o quadro legal relevante ao ensino superior em Angola. Pela utilização deste instrumento, foi possível dissecar as obrigações legais em requisitos ou critérios. Foi também possível estabelecer três graus de conformidade legal, nomeadamente: total, parcial e nenhuma. Notou-se, de igual forma, a existência de um total de 83 obrigações legais das instituições do ensino superior em Angola, sendo os regulamentos e as normas as fontes do maior número de obrigações. Destes, existem entre cinco a quinze requisitos legais por obrigação, perfazendo um volume enorme de requisitos legais com os quais as IES em Angola devem mostrar conformidade legal. A aplicação da checklist permite a gestão desse leque diverso e numeroso de requisitos específicos legais. São sugeridas várias medidas complementares ao quadro legal que devem ser implementadas em Angola com o intuito de se criar uma cultura de conformidade legal no ensino superior, promovendo-se, deste modo, a sua qualidade.
João Manuel da Costa Canoquena mail joao.canoquena@unic.co.ao, María Elena Castro Rodríguez mail maria.rodriguez@unic.co.ao, Yanisleidy Moreira Cabrera mail yanisleidy.cabrera@unic.co.ao,
da Costa Canoquena
<a class="ep_document_link" href="/5660/1/mathematics-11-00435.pdf"><img class="ep_doc_icon" alt="[img]" src="/style/images/fileicons/text.png" border="0"/></a>
en
open
Contextual Urdu Lemmatization Using Recurrent Neural Network Models
In the field of natural language processing, machine translation is a colossally developing research area that helps humans communicate more effectively by bridging the linguistic gap. In machine translation, normalization and morphological analyses are the first and perhaps the most important modules for information retrieval (IR). To build a morphological analyzer, or to complete the normalization process, it is important to extract the correct root out of different words. Stemming and lemmatization are techniques commonly used to find the correct root words in a language. However, a few studies on IR systems for the Urdu language have shown that lemmatization is more effective than stemming due to infixes found in Urdu words. This paper presents a lemmatization algorithm based on recurrent neural network models for the Urdu language. However, lemmatization techniques for resource-scarce languages such as Urdu are not very common. The proposed model is trained and tested on two datasets, namely, the Urdu Monolingual Corpus (UMC) and the Universal Dependencies Corpus of Urdu (UDU). The datasets are lemmatized with the help of recurrent neural network models. The Word2Vec model and edit trees are used to generate semantic and syntactic embedding. Bidirectional long short-term memory (BiLSTM), bidirectional gated recurrent unit (BiGRU), bidirectional gated recurrent neural network (BiGRNN), and attention-free encoder–decoder (AFED) models are trained under defined hyperparameters. Experimental results show that the attention-free encoder-decoder model achieves an accuracy, precision, recall, and F-score of 0.96, 0.95, 0.95, and 0.95, respectively, and outperforms existing models
Rabab Hafeez mail , Muhammad Waqas Anwar mail , Muhammad Hasan Jamal mail , Tayyaba Fatima mail , Julio César Martínez Espinosa mail ulio.martinez@unini.edu.mx, Luis Alonso Dzul López mail luis.dzul@uneatlantico.es, Ernesto Bautista Thompson mail ernesto.bautista@unini.edu.mx, Imran Ashraf mail ,
Hafeez