relation: http://repositorio.unic.co.ao/id/eprint/6899/ canonical: http://repositorio.unic.co.ao/id/eprint/6899/ title: Utilization of Stockwell Transform, Support Vector Machine and D-STATCOM for the Identification, Classification and Mitigation of Power Quality Problems creator: Mengistu, Epaphros creator: Khan, Baseem creator: Qasaymeh, Yazeed creator: Alghamdi, Ali S. creator: Zubair, Muhammad creator: Awan, Ahmed Bilal creator: Ashiq, Muhammad Gul Bahar creator: Ali, Samia Gharib creator: Mazas Pérez-Oleaga, Cristina subject: Ingeniería description: Power Quality (PQ) has become a significant issue in power networks. Power quality disturbances must be precisely and appropriately identified. This activity involves identifying, classifying, and mitigating power quality problems. A case study of the Awada industrial zone in Ethiopia is taken into consideration to show the practical applicability of the proposed work. It is found that the current harmonic distortion levels exceed the restrictions with a maximum percentage Total Harmonic Distortion of Current (THDI) value of up to 23.09%. The signal processing technique, i.e., Stockwell Transform (ST) is utilized for the identification of power quality issues, and it covers the most important and common power quality issues. The Support Vector Machine (SVM) method is used to categorize power quality issues, which enhances the classification procedure. The ST scored better in terms of accuracy than the Wavelet Transform (WT), Fourier Transform (FT), and Hilbert Transform (HT), obtaining 97.1%, as compared to 91.08%, 88.91%, and 86.8%, respectively. The maximum classification accuracy of SVM was 98.3%. To lower the current level of harmonic distortion in the industrial sector, a Distribution Static Compensator (D-STATCOM) is developed in the current control mode. To evaluate the performance of the D-STATCOM, the performance of the distribution network with and without D-STATCOM is simulated. The simulation results show that THDI is reduced to 4.36% when the suggested D-STATCOM is applied in the system. date: 2023 type: Artículo type: PeerReviewed format: text language: en rights: cc_by_4 identifier: http://repositorio.unic.co.ao/id/eprint/6899/1/sustainability-15-06007.pdf identifier: Artículo Materias > Ingeniería Universidad Internacional Iberoamericana México > Investigación > Producción Científica Universidad Internacional do Cuanza > Docencia > Trabajos finales de grado Abierto Inglés Power Quality (PQ) has become a significant issue in power networks. Power quality disturbances must be precisely and appropriately identified. This activity involves identifying, classifying, and mitigating power quality problems. A case study of the Awada industrial zone in Ethiopia is taken into consideration to show the practical applicability of the proposed work. It is found that the current harmonic distortion levels exceed the restrictions with a maximum percentage Total Harmonic Distortion of Current (THDI) value of up to 23.09%. The signal processing technique, i.e., Stockwell Transform (ST) is utilized for the identification of power quality issues, and it covers the most important and common power quality issues. The Support Vector Machine (SVM) method is used to categorize power quality issues, which enhances the classification procedure. The ST scored better in terms of accuracy than the Wavelet Transform (WT), Fourier Transform (FT), and Hilbert Transform (HT), obtaining 97.1%, as compared to 91.08%, 88.91%, and 86.8%, respectively. The maximum classification accuracy of SVM was 98.3%. To lower the current level of harmonic distortion in the industrial sector, a Distribution Static Compensator (D-STATCOM) is developed in the current control mode. To evaluate the performance of the D-STATCOM, the performance of the distribution network with and without D-STATCOM is simulated. The simulation results show that THDI is reduced to 4.36% when the suggested D-STATCOM is applied in the system. metadata Mengistu, Epaphros; Khan, Baseem; Qasaymeh, Yazeed; Alghamdi, Ali S.; Zubair, Muhammad; Awan, Ahmed Bilal; Ashiq, Muhammad Gul Bahar; Ali, Samia Gharib y Mazas Pérez-Oleaga, Cristina mail SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, SIN ESPECIFICAR, cristina.mazas@uneatlantico.es (2023) Utilization of Stockwell Transform, Support Vector Machine and D-STATCOM for the Identification, Classification and Mitigation of Power Quality Problems. Sustainability, 15 (7). p. 6007. ISSN 2071-1050 relation: http://doi.org/10.3390/su15076007 relation: doi:10.3390/su15076007 language: en